|
|
Post by andycallison on Sept 14, 2014 5:23:52 GMT -8
Full day of tracking later. Five different sessions. All good!!  ? |
|
|
|
Post by luxeomni on Sept 15, 2014 7:01:15 GMT -8
Can you share with us the avid page you found ?
Best regards
J.
|
|
|
|
Post by andycallison on Sept 16, 2014 8:23:13 GMT -8
|
|
|
|
Post by luxeomni on Sept 16, 2014 14:28:19 GMT -8
ok it didn't do anything for me, i think it's still that "COLOR LCD" profile that get lost and i don't know how to get it back... i ve got many color profiles available but not this one...
|
|
hez
Junior Member
Posts: 75 
|
Post by hez on Sept 16, 2014 15:32:46 GMT -8
luxeomni: Does this not work:
Remove the mark on "show profiles for this display only", and hopefully Color-LCD will be available in the list.
?
|
|
|
|
Post by luxeomni on Sept 17, 2014 6:10:04 GMT -8
Does not work, i ve got a lot of " unknown monitor" profiles but no Color-LCD one  |
|
|
|
Post by Slate Media Technology on Sept 17, 2014 7:22:17 GMT -8
Hey Luxeomni,
Please contact me via email or skype and ill help you resolve this.
Kind Regards,
—
Trevor Fedele
RAVEN Software Specialist
Slate Media Technology // Slate Digital LLC
trevor@stevenslate.com
Skype: Trevor Fedele (Slate Media Technology)
|
|
|
|
Post by andycallison on Sept 18, 2014 7:01:15 GMT -8
So something still not right. Loaded a session that was working and they wouldn't align properly again. Trashed the prefs of that optimization sheets and working again. Strange!!
|
|
|
|
Post by Slate Media Technology on Sept 18, 2014 7:35:40 GMT -8
Hey Andy,
Please contact me via email or skype so I can take a look at your system.
Kind Regards,
—
Trevor Fedele
RAVEN Software Specialist
Slate Media Technology // Slate Digital LLC
trevor@stevenslate.com
Skype: Trevor Fedele(Slate Media Technology)
|
|
gonzo
New Member
Posts: 9
|
Post by gonzo on Nov 10, 2014 22:46:43 GMT -8
Anyone found a fix for the Metering and color scheme adoption problems...?
|
|
|
|
Post by seafoam on Nov 17, 2014 2:03:55 GMT -8
Anyone found a fix for the Metering and color scheme adoption problems...? Hi gonzo , I just had this issue for days , I hope i fixed it , as what just worked for me was the tip from Hez (thx hez  on the previous page ................, and what got me meters and colours restored was I had to click the small green dot/circle at top left of my monitor srceen to enlarge the window to full size ..., I hope it works for you too , as I feel your pain , I was going nuts for days . |
|
JLIT
New Member
Posts: 21
|
Post by JLIT on Nov 20, 2014 13:25:24 GMT -8
I have yet to get my meters/colors to display correctly after following everyones suggestions in the thread and in the manual. I've done re-aligning multiple times to no avail as well as checking the Display Preferences which do not have a Color LCD profile as Hez suggested (even after unchecking the box to only show profiles for this display).
EDIT:
Wow weird fix I just found for this. I dragged the Display Preferences window to my other monitor and then quit System Pref's. My Mix window was totally moved and not aligned at first look then I hit the maximize button and it perfectly aligned as I had it before, except now there is colors and metering!
|
|
|
|
Post by Slate Media Technology on Nov 20, 2014 13:52:22 GMT -8
JLIT,
Sometimes there can be a little offset that can cause issues, that maximize button is a great thing to check. Glad to hear everything is working out!
Kind Regards,
—
Trevor Fedele
RAVEN Software Specialist
Slate Media Technology // Slate Digital LLC
trevor@stevenslate.com
|
|
|
|
Post by ootermind on Feb 16, 2015 14:58:17 GMT -8
Seem to be having this same problem here (or similar rather). To me it looks like it's a height thing - one example is that by doing a bc on insert a or send a, it goes to the second slot instead! Also, the height of faders don't seem to match my PT faders, so I see the top of the old PT fader below the Raven fader. I have selected just one row of inserts, one of sends, have tried comments, delay compensation & colors both viewed and hidden but no luck. Have obviously tried resizing with the Green button on the top left and have gone through all settings in the manual (the only one I can't seem to find is the "Color-LCD" one from the setup guide.. for some reason I just get Digital, Adobe RGB, Cinema HD, Generic RGB and sRGB. Any ideas?
Edit - sorry, just realized there was a page 2 here.. still, went through it and looks like I've tried all that people mention (I have no second display so that's not it for sure).
Thanks!
|
|
|
|
Post by jameyz on Feb 16, 2015 15:14:51 GMT -8
I would try to hit up slate support on Skype... if you can;t get through try this BC to re align the MTi mixer.. ALIGN MIX WINDOW 10 INSERTS.ravbc (826 B) my Display is set to digital also so i don't think that is the issue.. for some reason i think it must be track color, since that is the only thing that would change it by one insert. peace p.s. Which version of Pro Tools are you on???  |
|
|
|
Post by ootermind on Feb 16, 2015 15:37:10 GMT -8
Thanks! Randomly the last time I tried it now it worked! I'm on PT 11.3.0 - didn't change anything this last time but after a new restart it seemed to have grabbed? Maybe I'm just getting better at lining it up haha. Thanks for all the help! Will do the Skype thing if it starts happening again!
|
|
|
|
Post by adriad on Feb 21, 2015 23:13:22 GMT -8
can i get some help. this is my second raven i receive. and i did not get a pass code in the box can someone help.
|
|
|
|
Post by adriad on Feb 21, 2015 23:14:44 GMT -8
can i get some help. this is my second raven mti i receive. and i did not get a pass code in the box can someone help.
|
|
|
|
Post by adriad on Feb 21, 2015 23:17:07 GMT -8
I Currently own your Raven MTI Model, i Purchased Within the Last Couple
Weeks From a Local Guitar Center In LosAngeles Ca (Pico Westwood Location)
It Was Factory Seal when Received, i Opened everything was Inside But the
when in proceed to set up System I was aware i Need a PassCode Which is
suppose to Be Include inside Box on Card . I didn't receive any Paperwork
inside this box only hardware & wires
Contacted the Store Where Purchase was Made i was told to Call SlateMedia
Tech 323.656.2050 Called 2weeks didn't get any response just Voicemail
Need Assistance ASAP I Would Like to Continue On With My Career on Making
Music ...
Serial # : MTI-2013-0291
12-06-2013
|
|
|
|
Post by jameyz on Feb 23, 2015 8:25:04 GMT -8
I Currently own your Raven MTI Model, i Purchased Within the Last Couple Weeks From a Local Guitar Center In LosAngeles Ca (Pico Westwood Location) It Was Factory Seal when Received, i Opened everything was Inside But the when in proceed to set up System I was aware i Need a PassCode Which is suppose to Be Include inside Box on Card . I didn't receive any Paperwork inside this box only hardware & wires Contacted the Store Where Purchase was Made i was told to Call SlateMedia Tech 323.656.2050 Called 2weeks didn't get any response just Voicemail Need Assistance ASAP I Would Like to Continue On With My Career on Making Music ... Serial # : MTI-2013-0291 12-06-2013 Definitely fill out a support ticket at Slate and they will get you a new card.. Peace |
|
?
on the previous page ................, and what got me meters and colours restored was I had to click the small green dot/circle at top left of my monitor srceen to enlarge the window to full size ..., I hope it works for you too , as I feel your pain , I was going nuts for days .
