|
|
Post by eyrespace on Mar 16, 2016 9:41:02 GMT -8
Trying to get my MTI2 up and running but the Raven software freezes and doesn't finish loading. No buttons respond except for the hide Raven button. I then have to force quit. Late 2013 Mac Pro, 32 gigs ram with Protools 12.4 Thanks
|
|
|
|
Post by jameyz on Mar 16, 2016 15:02:40 GMT -8
Sounds like a touch driver issue, did you install the mti2 driver?
Do You have touch on the screen?
Are you using multiple screens?
|
|
|
|
Post by eyrespace on Mar 16, 2016 22:16:18 GMT -8
yes it appears to be a touch driver issue
yes I installed the mti2 driver
I had wiped Protools preferences and needed to set up the hui parameters again
Ran out of time in my trouble shooting and needed to run a session
At the end I had some touch on the screen but the curser moves to wherever I touch
I have a Mac 27 inch monitor that I intend to use eventually
Thanks for your help
|
|
|
|
Post by jameyz on Mar 17, 2016 5:36:18 GMT -8
yes it appears to be a touch driver issue yes I installed the mti2 driver I had wiped Protools preferences and needed to set up the hui parameters again Ran out of time in my trouble shooting and needed to run a session At the end I had some touch on the screen but the curser moves to wherever I touch I have a Mac 27 inch monitor that I intend to use eventually Thanks for your help The HUI setup is only for if your transport and faders aren't responding to pro tools transport info. i.e if you hit play on pro tools the Raven transport should follow. For anything to do with touch you will be wanting to look at the UPDD touch drive settings. If u have multiple screen take a look at this. slatemt.zendesk.com/hc/en-us/articles/216194688-Multiple-display-setup-issues-Raven-Touch-Controlling-another-screenAfter checking these settings. If you Raven doesn't respond to touch, try a re-install of Raven and the UPDD touch driver. |
|
