|
|
Post by Bill Rigby on Feb 3, 2015 2:18:28 GMT -8
Hi Folks....
Surely you are getting closer?!?!?!
Please, don`t let Pro Tools 10 be Vapourware.
|
|
|
|
Post by Bill Rigby on Feb 4, 2015 2:39:08 GMT -8
Um , was my post deleted?
Just wondering if there is any progress on Pro Tools 10 and the Raven on the PC.
|
|
|
|
Post by Slate Media Technology on Feb 4, 2015 7:52:57 GMT -8
Hi Bill,
No posts were deleted.
There is lots of progress on Pro Tools 10, we are all very excited and working hard to have it out as soon as we can. We will be able to announce more soon.
Kind Regards,
—
Trevor Fedele
RAVEN Software Specialist
Slate Media Technology // Slate Digital LLC
trevor@stevenslate.com
|
|
|
|
Post by Bob on Feb 14, 2015 8:31:36 GMT -8
Really quit playing games and give a month for goodness sake. We want a PC Protools version. No other questions please just answer this. Pro Tools PC release month? Thanks
|
|
|
|
Post by Slate Media Technology on Feb 16, 2015 9:38:17 GMT -8
Hi Bob,
As mentioned above we are still in development, we are in a phase where unexpected road blocks can still occur, once we arrive in a place where we can give a specific month and date we will.
Thank you for your patience.
Kind Regards,
—
Trevor Fedele
RAVEN Software Specialist
Slate Media Technology // Slate Digital LLC
trevor@stevenslate.com
|
|
|
|
Post by kecked on Feb 25, 2015 7:22:54 GMT -8
Well here we are at the end of February. Still in development? I really need the PC version for protools 11 and soon 12.
Can you just offer a driver so we can use the mti as a multitouch now. Forget the rest of your software. All we need for now is the multitouch for the faders and the ability to use the screen like a regular touchscreen. Who ever makes the screen should already have such a driver I would think.... batch commander and the rest can come later but at least the pc world can utilize your product. want to see your Q1 and Q2 number hit the roof. Do this. |
|
|
|
Post by Bill Rigby on May 11, 2015 22:17:10 GMT -8
How are things progressing guys?
|
|
|
|
Post by Slate Media Technology on May 12, 2015 8:49:30 GMT -8
Hey Guys,
PC Dev is moving along. Still no dates, we should be entering beta soon. If you already own a Raven and would like to be a part of beta please contact me at trevor@stevenslate.com
We would love to have ya!
Kind Regards,
—
Trevor Fedele
Product Specialist
Slate Media Technology // Slate Digital LLC
trevor@stevenslate.com
|
|
|
|
Post by Slate Media Technology on Jun 16, 2015 11:47:33 GMT -8
Hello,
I wanted to briefly update you with some information from the source. Because the development of software is variable and unforeseen issues can cause delays that are unpredictable in resolution length, we are occasionally faced with delays to our estimated target dates. I want to personally inform you know that the following developments for both RAVEN and Batch Commander are underway and I have included updated target dates for public support. Again, these are targeted dates and are not official release dates.
Currently we are targeting:
Q4 2015: Cubase, Nuendo, Ableton Live, Studio One, Digital Performer MAC - And Pro Tools PC.
Q2 2016: Cubase, Nuendo, Ableton Live, Studio One, Digital Performer PC.
Because our developments are not only dependent on our own programming, but the DAWs programming as well - there are many issues that can arise during the development phase not only on our end, but issues we require resolving directly with the DAW developers. We will do our best to meet these targets and have a lot of evidence to believe we will, however we cannot guarantee any official release dates at this time.
Thank you for your on-going patience, and as always - if you ever have any questions or comments, feel free to make a post on our forum.
For support issues, do not hesitate to contact one of our support representatives at slatesupport.com
md
--
Matt Dodge
Software Director,
Slate Media Technology // Slate Digital LLC
slatemt.com // slatedigital.com
|
|
|
|
Post by Bill Rigby on Jul 5, 2015 21:26:09 GMT -8
Thank you for your further information.
Are you definitely still planning on a Protools 10 for PC seeing Protools has now moved to 12?
The initial post on this thread was from me specifically targeting the question about Pro Tools 10 on PC as this was the last HD TDM supported Protools release.
Time and updates move on but the Hardware changes and I was extremely pointed on this question.
You assured me then, but has time changed your mind or is development moved away from this idea?
|
|
|
|
Post by Slate Media Technology on Jul 6, 2015 6:49:43 GMT -8
Hi Bill,
We will be releasing a PT10 Version. This will be released with PT PC release, we intend to enter beta pending an avid fix. Feel free to email me and we can discuss adding you to the beta team.
Kind Regards,
—
Trevor Fedele
Product Specialist
Slate Media Technology // Slate Digital LLC
trevor@stevenslate.com
|
|
|
|
Post by Bill Rigby on Apr 17, 2016 11:07:05 GMT -8
Hi Trevor; I`ve had a few encouraging conversations to a lovely fella named Raoul from Blaze studios who is one of your Beta testers. His system is similar to mine PT 10 HD7 on a PC. Although you had previously offered the Beta testing to me, the work pressure would not allow me the downtime, but thank you for the offer) I have a couple of specific questions related to my workflow. I am wondering if I should buy 2 MTi2`s and run them side by side. Is this possible on the One machine? Would this give me 12 points of touch (ie 6 on each screen) Or would I be better to get an MTX or would the cost be too restrictive. I also do a lot of work in surround but I already have my monitoring situation all sorted out (Tascam DS-M7.1) So the monitoring on the MTX appears superfluous to me. Also I utilise a JLCooper Surround Panner that runs through the peripherals setup in Pro Tools. What impact would the Raven have on this? I also run Ableton Live rewired into pro Tools on separate monitors. I have a 4 head video card and Utilise 2 for Pro Tools and 2 for Ableton. Would I still be able to do this. What about Push controllers, midi keybords etc? I also run the Video I work to in a separate window as I stretch the Pro Tools application onto the third monitor and fill this monitor with the video (very common practice) How does the Raven address this? Could you perhaps email me on suitesurround@hotmail.com and cc me brigby@nine.com.au to discuss my options? (Although I`m guessing that a reply here as well to the specific questions would assist my other fellow forum users as well as you guys , sharing is caring after all  ) Hope to hear from you soon, Bill |
|
|
|
Post by jameyz on Apr 17, 2016 12:17:15 GMT -8
MTi2 has 10 point touch, and you can run 2 MTi's side by side.. You can also run a MTX with a MTi1. This is a nice setup and you can see pics of this from Messe and the user Simon on the Facebook group.
The surround planner shouldn't get in the way as long as you run in it on the last HUI bank...
|
|
|
|
Post by Sonic Imagery Productions on Jul 29, 2016 9:31:23 GMT -8
I received my Raven MTi2 a few days ago from Sweetwater Music. I registered it and activated it with my iLok account. Windows 10 recognized the Raven as a Touch screen and I was able to use the Windows Calibration software. I was able to obtain the latest Beta Software from Slate support. Response was quick however the first link I received for download was a .dmg installation package (Mac), the second attempt gave me access to the PC version and I quickly installed all components. One of the components is the Neyrinck Ney-Fi. It is suggested to have it auto start but Windows 10 does not allow this. I manually initiate it instead. The calibration component of the MTi2 Bea release does not work at all. The calibration screen shows with one set of crosshairs to initiate the process but it does not respond and I must exit out. After starting a Pro Tools session I start the Raven software and the Toolbar appears but nothing is functional. It will not close either. I can save and close the Pro Tools session but the toolbar remains. I have to utilize the Task Manager to terminate the Raven Tool bar. After several times of uninstalling, re-installing, trying different graphics cards, you name it, I tried it with no change in the results. So… at this point all I have is a very expensive Touchscreen Monitor with no Raven capabilities whatsoever. Guess that’s why it’s a Beta…
|
|
|
|
Post by jameyz on Jul 29, 2016 10:53:37 GMT -8
I received my Raven MTi2 a few days ago from Sweetwater Music. I registered it and activated it with my iLok account. Windows 10 recognized the Raven as a Touch screen and I was able to use the Windows Calibration software. I was able to obtain the latest Beta Software from Slate support. Response was quick however the first link I received for download was a .dmg installation package (Mac), the second attempt gave me access to the PC version and I quickly installed all components. One of the components is the Neyrinck Ney-Fi. It is suggested to have it auto start but Windows 10 does not allow this. I manually initiate it instead. The calibration component of the MTi2 Bea release does not work at all. The calibration screen shows with one set of crosshairs to initiate the process but it does not respond and I must exit out. After starting a Pro Tools session I start the Raven software and the Toolbar appears but nothing is functional. It will not close either. I can save and close the Pro Tools session but the toolbar remains. I have to utilize the Task Manager to terminate the Raven Tool bar. After several times of uninstalling, re-installing, trying different graphics cards, you name it, I tried it with no change in the results. So… at this point all I have is a very expensive Touchscreen Monitor with no Raven capabilities whatsoever. Guess that’s why it’s a Beta… Do you have multiple monitors on your setup?? Have you tried just the Raven?? Have you tried a clean un-installing of the touch driver?? run the UPDD uninstall from the program files x86 menu.. Then re-install Raven touch driver. The Reason Raven isn't working is because the touch driver isn't setup correctly. When you get the crosshairs, touch the X for 5 seconds to register that screen as the touch screen. The click "next"on the other screens I wonder if the windows touch calibration software messed something up, can you uninstall that somehow?? If you can;t get it to work, send me an email and we can setup a screen share support session.. |
|
)
