|
|
Post by garrettmiller1 on Jun 26, 2015 3:40:19 GMT -8
Hey,
Is it ever going to be possible to use all 10 inserts and all 10 sends with BC? I use more than 5 all the time and being limited to only 5 is a huge drawback. I'm still using the BC 2.5 demo and am on the fence about buying it...
I love lots of things about BC but some things seem like 2 steps forward, 1 step back...
Thanks!
|
|
|
|
Post by jameyz on Jun 26, 2015 5:00:50 GMT -8
You can use 15 inserts, but any of the sends/output BC's will need to be swapped out with other BC's.. You can find them in the post folder...
|
|
|
|
Post by garrettmiller1 on Jun 26, 2015 5:53:41 GMT -8
To be clear, I'm using Pro Tools 11. There's only 10 inserts, so I'm assuming you mean I could use either 10 inserts and 5 sends or 5 inserts and 10 sends?
What do you mean the send/output BC's will need to be swapped out? I'm obviously ignorant to all of this, but was basing my 5 insert limitation on the BC 2.0 manual. Is there a more current manual?
Thanks Jamey!
|
|
|
|
Post by jameyz on Jun 26, 2015 8:11:15 GMT -8
You are correct 10 inserts and five sends or five inserts and 10 sends. So if you were on layout three of the basic layout and hit "Add sends" and you were showing 10/5 it will actually click on the inserts f-j tab. Or if you hit "bus selected tracks to stereo inst" it won't click the correct output. It would probably click the sends.. So by swapping out "bus select tracks" with "bus select tracks 15ins" it will click the correct output..
Also, there is a "show inserts" and "toggle inserts/sends" batch command that will swap - 5 ins and 5 sends with 10 inserts. Or 10 inserts with 10 sends.
|
|
