gnapier
Junior Member
"Not all who wander are lost..."
Posts: 96 
|
Post by gnapier on May 25, 2018 19:15:12 GMT -8
Hi Jamey,
Just wondering if there is any official word on Raven's compatibility with the new S1 v4. I have not tested it extensively, but my Gestures don't seem to work, and S1 seems unresponsive to touch input. (Can't choose events, tools, etc., by tapping with my finger. I've selected the correct gesture profile.) The macro buttons seem to work ok for the most part.
Just wondering if there was any time frame for an update you can share. And if you need a beta tester, lemme know!
Best,
George
|
|
|
|
Post by jameyz on May 26, 2018 11:34:00 GMT -8
Hi Jamey, Just wondering if there is any official word on Raven's compatibility with the new S1 v4. I have not tested it extensively, but my Gestures don't seem to work, and S1 seems unresponsive to touch input. (Can't choose events, tools, etc., by tapping with my finger. I've selected the correct gesture profile.) The macro buttons seem to work ok for the most part. Just wondering if there was any time frame for an update you can share. And if you need a beta tester, lemme know! Best, George Its working great for me with the RAVEN 3.5 Here is a quick setup guide for Studio One on MTi2 for Mac OS X : Here is an article on how to quickly setup Touch and Gestures for Studio One. slatemt.zendesk.com/hc/en-us/articles/115015822567-RAVEN-3-5-Studio-One-SetupBe sure to check out the QuickStart video. Also, check out the Setup Video |
|
gnapier
Junior Member
"Not all who wander are lost..."
Posts: 96
|
Post by gnapier on May 29, 2018 4:57:49 GMT -8
Hi Jamey,
This applies to both Raven for Studio One and Batch Commander for Studio One:
So, I've gone through the set up videos. All drivers are installed, the monitors calibrated, the UPDD Daemon tests passed, etc. However, if I load up the Raven Studio One gestures, there is no touch response whatsoever. The Raven macro buttons don't respond, nor does anything in Studio One. The weird thing is that if I load up the Raven Default gestures profile, everything works. Odder still: Most things don't register as a double click in studio one even though the "Tap" function is enabled. It's more or less usable.
I will log a support request so we can handle this through proper channels. Thanks!
|
|
gnapier
Junior Member
"Not all who wander are lost..."
Posts: 96
|
Post by gnapier on May 29, 2018 5:29:12 GMT -8
Nix the above. I re-installed Raven 3.5 and the gestures profiles. I also changed the UDP Port in Studio One Touch preferences to 3334. Everything seems to be working ok now!  |
|
