|
|
Post by hocusprocus on Jan 16, 2017 5:01:52 GMT -8
Hi, I noticed those two weird behaviours with my dual raven setup:
- as I turn on external SEND layout on (which I have on my right screen), the edit windows scrools on top of my track list after less than a second. To reproduce this issue try to view the last tracks f your session in the edit window, then enable the ravn send layout and see what happens at your edit window.
This is annoying because I can't choose which tracks I'm going to see on edit window if I'm using the send panel.
- when the raven mixer is up and I touch the screen in the zone covered by the mixer layer, the arrow shows in that point but in a moment it disappears and it shows again in another screen position..I couldn't find a scheme. This is relevant for example while I have to double hit a fader to get it to unity.
cheers
Francesco
|
|
|
|
Post by jameyz on Jan 16, 2017 6:55:12 GMT -8
Hi, I noticed those two weird behaviours with my dual raven setup: - as I turn on external SEND layout on (which I have on my right screen), the edit windows scrools on top of my track list after less than a second. To reproduce this issue try to view the last tracks f your session in the edit window, then enable the ravn send layout and see what happens at your edit window. This is annoying because I can't choose which tracks I'm going to see on edit window if I'm using the send panel. - when the raven mixer is up and I touch the screen in the zone covered by the mixer layer, the arrow shows in that point but in a moment it disappears and it shows again in another screen position..I couldn't find a scheme. This is relevant for example while I have to double hit a fader to get it to unity. cheers Francesco Hi, 1. I would just turn off "Edit Window Follow banking" in PT Prefs. This will stop the edit window from following any HUI banking.  2. Are you using multiple displays??? Perhaps The UPDD Hardware Settings may not be set to the correct screen, open the UPDD Console and in the Hardware settings be sure to set it to Monitor 1.
If using multiple monitors, set all monitors to "WHOLE" in the UPDD Console Hardware settings, then press "Configure All" next to the monitor selection. This will run through a setup screen, where you will need to "TOUCH" the X on the touch screen monitors, and "CLICK" the X on the screen that doesn't have touch.
|
|
|
|
Post by hocusprocus on Jan 17, 2017 1:36:11 GMT -8
2. I'm on DUAL RAVEN with a 3rd monitor and not so long time ago you sent me a beta version of updd and raven. Now I can't find anymore the updd setting app while I have the updd daemon tray icon where i can calibrate my system, but I can't find the "whole screen" setting page. By the way here is a quick video that I can't upload because exceeds size limit: www.dropbox.com/s/m6dchqfwpbyfs6z/IMG_1808.m4v?dl=0Looks like that the pointer goes back to where I clicked before pointing in the mixer area Francesco |
|
|
|
Post by jameyz on Jan 17, 2017 10:18:08 GMT -8
2. I'm on DUAL RAVEN with a 3rd monitor and not so long time ago you sent me a beta version of updd and raven. Now I can't find anymore the updd setting app while I have the updd daemon tray icon where i can calibrate my system, but I can't find the "whole screen" setting page. By the way here is a quick video that I can't upload because exceeds size limit: www.dropbox.com/s/m6dchqfwpbyfs6z/IMG_1808.m4v?dl=0Looks like that the pointer goes back to where I clicked before pointing in the mixer area Francesco The latest UPDD doesn't have calibration any more, since these type of screen auto calibrate. There are some mouse pointer settings in UPDD Gestures and UPDD TUIO. The mouse is supposed to return to the previous spot if you touch something on the Raven, so that makes sense. what doesn't look right its your Raven Internal Mixer. For some reason it is way to high. Perhaps you need to add the menu bar back on that display. |
|
