|
|
Post by lordbafford on Oct 17, 2016 12:04:15 GMT -8
Would it be possible to have a second fine fader mode/button? This way a user could toggle between the two modes quickly. For example one could be set to increments of 3 and the second could be set to finer increments of 1. This would be very helpful as the default setting without using fine fader mode is often a bit too jumpy between values, even when working in the area near unity on the faders. This is what I find to be the most difficult part of switching from from using real flying faders and various fader controllers to the Raven's virtual faders.
The option to change the default sensitivity level would also work, I suppose.
Thanks!
|
|
|
|
Post by jameyz on Oct 17, 2016 12:32:01 GMT -8
|
|
|
|
Post by lordbafford on Oct 20, 2016 9:47:52 GMT -8
Jameyz
Thanks for the reply. I understand that you can change this setting by holding the button down, but it is a big detriment when trying to quickly mix as one would with a real fader. On a real fader of control surface you don't have to stop and change the resolution of the fader ever time you want to make more subtle adjustments. This is the on thing that the Raven seriously lacks due to its jumpy resolution. Being able to more quickly make fine adjustments and then large adjustments without having to stop and pause to readjust the fine fader settings would be nice. Again this could be solved by having two fine fader options to compensate for the large jumps the default fader setting makes (When not using fine fader mode). Essentially giving you small, medium, and large fader resolutions.
|
|
