|
|
Post by Attica Records on Apr 25, 2016 2:40:31 GMT -8
Ok Guys
The set up iMac 27 inch, El Capitan and Cubase 8.5
No Raven faders showing, transport not working,
Is it me, or is it you?
Any ideas?
|
|
|
|
Post by jameyz on Apr 25, 2016 6:47:29 GMT -8
Sounds like there is no HUI communication between Cubase and V-control. Check V-control setups to be sure it is seeing Cubase..  Else, try closing the project and reopening the projects, but not quiting Cubase. |
|
|
|
Post by Slate Media Technology on Apr 29, 2016 7:38:23 GMT -8
^ What Jamey said. No Transport = Improper Midi setup.
- Trevor
|
|
tb777
New Member
Posts: 11 
|
Post by tb777 on May 2, 2016 17:45:49 GMT -8
I am having the same issue with no faders showing after updating.
Checked v control and everything seems fine, any ideas?
|
|
|
|
Post by jameyz on May 2, 2016 18:28:50 GMT -8
I am having the same issue with no faders showing after updating. Checked v control and everything seems fine, any ideas? Well the OP mentioned he had no transport , so that is a different issue altogether and a much deeper one. I have seen that issue with faders not showing up, it usually happens when opening a session with less than 24 tracks. If you make a track will the fader show up?? When this occurs, just close the project and re-open again. If that doesn't bring the faders up, then just close and reopen Cubase. This is something to do with the fix we added to be able to open multiple projects at time. New V-control update coming soon, so this will be resolved soon. |
|
tb777
New Member
Posts: 11
|
Post by tb777 on May 3, 2016 14:25:34 GMT -8
Thanks Jamey, I did find that the missing or partial fader issue returned for me. I downgraded and it resolved it. Perhaps I will wait to for the V Control update then try 3.1 again.
|
|
|
|
Post by jameyz on May 3, 2016 15:10:30 GMT -8
Thanks Jamey, I did find that the missing or partial fader issue returned for me. I downgraded and it resolved it. Perhaps I will wait to for the V Control update then try 3.1 again. Was this after you fixed the color scheme?? This is not happening to me. I would be interested in finding out why it would do that, send me an email when you get a chance. |
|
|
|
Post by mickglossop on May 4, 2016 9:41:33 GMT -8
I'm having the same problem with Pro Tools 10. No Raven fader overlay on the PT mixer and no transport control. Also, my Bank L/R 24 buttons have disappeared. If I hit Customize Toolbar, I see 2 sets of Bank L/R 24 buttons, neither of which work when dragged into my Layout.
I opened up Raven 3.02 (which was working perfectly) and now that has the same problems as Raven 3.1.
I noticed that a new version of Multitouch Platform was installed. Do I need to re-configure it?
By the way, is there any way to receive email notifications from this forum?
|
|
|
|
Post by jameyz on May 4, 2016 11:17:47 GMT -8
I'm having the same problem with Pro Tools 10. No Raven fader overlay on the PT mixer and no transport control. Also, my Bank L/R 24 buttons have disappeared. If I hit Customize Toolbar, I see 2 sets of Bank L/R 24 buttons, neither of which work when dragged into my Layout. I opened up Raven 3.02 (which was working perfectly) and now that has the same problems as Raven 3.1. I noticed that a new version of Multitouch Platform was installed. Do I need to re-configure it? By the way, is there any way to receive email notifications from this forum? It sounds like you don't have V-control open. When re-installing V-contorl will need to be relaunched after. Raven 3.1 didn't change anything with the Pro Tools mixer, so this shouldn't be a Raven issue. All users will have to re-add their banking buttons, as we added an extra set of banking buttons, so users can have 1 and 24 at the same time. |
|
|
|
Post by mickglossop on May 9, 2016 5:40:16 GMT -8
Hi - V-Control Pro is running. It always auto-loads on Mac startup.
However, if I open the Pro Control Pro window from the Apple menu bar, and select 'About V-Control Pro' it says that it's not licensed. This was never a problem with Raven 3.0.2.
|
|
|
|
Post by jameyz on May 9, 2016 7:05:43 GMT -8
Hi - V-Control Pro is running. It always auto-loads on Mac startup. However, if I open the Pro Control Pro window from the Apple menu bar, and select 'About V-Control Pro' it says that it's not licensed. This was never a problem with Raven 3.0.2. That is normal. Having Raven on your ilok acts as your license for V-control. Nothing has changed with v-contorl in this update. However I have seen it pop up asking for a license before when installing some other plugins that use ilok. Just ignore this message, as long as Raven is open v-contorl will work fine. |
|
|
|
Post by mickglossop on May 12, 2016 3:17:37 GMT -8
OK - that's reassuring, but I still have my original problem with Raven 3.1, i.e. no Raven faders.
I've re-installed 3.0.2 and it works OK.
|
|
|
|
Post by jameyz on May 12, 2016 6:48:16 GMT -8
OK - that's reassuring, but I still have my original problem with Raven 3.1, i.e. no Raven faders. I've re-installed 3.0.2 and it works OK. Which OS X are you on?? Nothing changed with Pro Tools faders on 3.1 and I have yet to see this issue, so this is pretty confusing, please send me an email and we can troubleshoot. |
|
