|
Post by waxman on Apr 15, 2016 8:05:31 GMT -8
I'm really enjoying being able to touch my UA Console and Plugs. Set up Spaces with the UAD mixer... Press the Control key and the Right or Left arrow key to move between Raven and UAD mixer. Using touch with the UAD mixer works great and the UAD mixer GUI looks somewhat like the Raven which is very cool. The UAD buttons and selections are big enough touch works great with it... Attachments:
|
|
miken
New Member
Posts: 2
|
Post by miken on Apr 15, 2016 8:25:48 GMT -8
Thanks for the tip.
|
|
|
Post by seafoam on Apr 18, 2016 7:43:40 GMT -8
The Devs will get this ..., Attachments:
|
|
|
Post by reedrobins on Apr 22, 2016 16:10:44 GMT -8
I'm really enjoying being able to touch my UA Console and Plugs. Set up Spaces with the UAD mixer... Press the Control key and the Right or Left arrow key to move between Raven and UAD mixer. Using touch with the UAD mixer works great and the UAD mixer GUI looks somewhat like the Raven which is very cool. The UAD buttons and selections are big enough touch works great with it...
|
|
|
Post by reedrobins on Apr 22, 2016 16:13:47 GMT -8
I'm really enjoying being able to touch my UA Console and Plugs. I can't get a lot of this to work, for example if I go to 'show sends', to see the huge send fader, and then move then, they snap back to 0 once I take my finger off. I experience lots of behaviors like that. Is there some you did in a setup app to optimize this? It would be REALLY cool to get this working right!
|
|
|
Post by seafoam on Apr 23, 2016 4:00:23 GMT -8
Thanks for 3.1.0 guys ...., Here have a cold Bintang (From Indonesia) ..., Cheers N' Beers
|
|
|
Post by casadelaiguana on Apr 23, 2016 5:51:20 GMT -8
Thanks for 3.1.0 guys ...., Here have a cold Bintang (From Indonesia) ..., Cheers N' Beers View Attachment3.1? Where!! I sure will go and grab a cold "club Colombia" beer from the fridge!!!
|
|
|
Post by casadelaiguana on Apr 23, 2016 6:03:21 GMT -8
I will keep my beer cold. The 3.1 ver is for the MTI 1, not the MTI2. Probably it will be this week....
|
|
|
Post by JZ on Apr 23, 2016 7:19:57 GMT -8
Both Raven MTi1 and MTi2 app are the same thing. It is only the installer that is different, as long as you skip the touch driver install part everything will work fine.. Since there are no driver updates there is no need to install the touch driver again anyways. Also, it is just the link name that says 3.0.2, it is the correct link for 3.1 for MTi2 users..
|
|
|
Post by bunkerbob on Apr 24, 2016 10:30:40 GMT -8
nothing in my email, no surprise there then.
|
|
|
Post by jameyz on Apr 24, 2016 10:32:29 GMT -8
nothing in my email, no surprise there then. The email blast didn't go out yet, since its the weekend. We will send out a blast on monday.
|
|
|
Post by bunkerbob on Apr 27, 2016 5:15:13 GMT -8
Yeah tell em Monday, don't say which one tho.
|
|
gerk
Junior Member
Posts: 58
|
Post by gerk on Apr 27, 2016 5:20:10 GMT -8
Yeah tell em Monday, don't say which one tho. I think bunbkerbob is really a secret identity ... here's the real bunkerbob:
|
|
|
Post by jameyz on Apr 27, 2016 8:11:17 GMT -8
So we are not sending out an email blast for this update since Raven users will get a notification that there is an update when they launch their Raven software. Hope everybody is updated and making hits. We are already working hard on the next update to get El Capitan supported..
|
|
drumah
Junior Member
Posts: 60
|
Post by drumah on Apr 27, 2016 10:07:52 GMT -8
Up and running.. However, I did need to restart my machine after the install.. might want folks to know or put a restart required in your installer..
Maybe if was just my case, but I had to do it to get the update to work..
-D
|
|
|
Post by jameyz on Apr 27, 2016 10:35:06 GMT -8
Up and running.. However, I did need to restart my machine after the install.. might want folks to know or put a restart required in your installer.. Maybe if was just my case, but I had to do it to get the update to work.. -D It's always a good idea. However the installer does overwrite V-control. So the DAW and V-control will need to be relaunched for sure..
|
|
gerk
Junior Member
Posts: 58
|
Post by gerk on Apr 27, 2016 11:52:48 GMT -8
Maybe also UPDD gets overwritten?
|
|
|
Post by jameyz on Apr 27, 2016 12:42:35 GMT -8
Maybe also UPDD gets overwritten? If you run the second half of the installer it will get overwritten. However this update uses the same UPDD and Multitouch Platform as the previous version..
|
|
gerk
Junior Member
Posts: 58
|
Post by gerk on Apr 27, 2016 12:45:22 GMT -8
But if it runs and replaces the same existing version it will kill the process for it.
|
|
|
Post by waxman on Apr 27, 2016 16:18:37 GMT -8
Not restarting is just asking for it
|
|