|
Post by dayadon on Feb 10, 2017 6:40:19 GMT -8
I've been through the instruction details too many times, but I am clearly missing something. All Raven mixer choices come up just fine, but faders and everything else have no effect on PT.
I'm using an i7 PC with 32 gig of RAM (Dell) and SSD drives. Raven 3.2.
Thanks. Dennis
|
|
|
Post by jameyz on Feb 10, 2017 9:49:22 GMT -8
I've been through the instruction details too many times, but I am clearly missing something. All Raven mixer choices come up just fine, but faders and everything else have no effect on PT. I'm using an i7 PC with 32 gig of RAM (Dell) and SSD drives. Raven 3.0. Thanks. Dennis If you are getting a one way HUI communication between PT and Raven, you should try trashing your PT prefs. Here is an article on how to do it. slatemt.zendesk.com/hc/en-us/articles/222025687-Windows-Pro-Tools-No-HUI-Communication-Raven-Transport-not-workingYou will need to re-configure all the HUI peripherals and Pro Tools Preferences after trashing the prefs.
|
|
|
Post by dayadon on Feb 10, 2017 12:51:10 GMT -8
I've trashed these things, and setup again.
|
|
|
Post by dayadon on Feb 10, 2017 13:04:37 GMT -8
xt2, xt3 and V-control are checked at the top, then a few are not selected below, then several are 'emulated' things are selected below, as well as Vienna Instruments and my Steinberg Audio Interface
|
|
|
Post by jameyz on Feb 10, 2017 14:55:42 GMT -8
xt2, xt3 and V-control are checked at the top, then a few are not selected below, then several are 'emulated' things are selected below, as well as Vienna Instruments and my Steinberg Audio Interface Did you setup the HUI Prefs again?? Here is the link to start a support ticket for the Raven..
|
|
|
Post by dayadon on Feb 10, 2017 22:51:55 GMT -8
Yes
|
|
|
Post by dayadon on Feb 11, 2017 8:57:47 GMT -8
Hello.
I finally got faders and record and all else working. It was sort of accidently!
I was just clicking around on the pro tools menus, when I clicked on the Window/Configuration, I saw 4 sets of MIX and EDIT from which to select. The 8. MIX was selected. I decided to try the Top (2. MIX), and then I noticed that Raven was now working as it should. I'm finally happy with Raven!
I never saw anything about this in the Manuals. Now I'm wondering if I can delete the other (3-8) choices, so that things won't ever slip down to one of those.
Dennis
|
|
|
Post by jameyz on Feb 11, 2017 12:25:18 GMT -8
Hello. I finally got faders and record and all else working. It was sort of accidently! I was just clicking around on the pro tools menus, when I clicked on the Window/Configuration, I saw 4 sets of MIX and EDIT from which to select. The 8. MIX was selected. I decided to try the Top (2. MIX), and then I noticed that Raven was now working as it should. I'm finally happy with Raven! I never saw anything about this in the Manuals. Now I'm wondering if I can delete the other (3-8) choices, so that things won't ever slip down to one of those. Dennis article on how to easy sync Pro Tools and Raven using Window Configurations.
Here is the spot in the video how to sync manually.
|
|