|
Post by loveyourself on Oct 3, 2021 16:43:22 GMT -8
Raven users, first time post here.
To get more analog console feeling I ask myself if I can get the raven mixer to not control the DAW fader. It should control the fader of my channel strip simulation. It makes a lot more sense this way ... all Logic faders would stay at unity gain.
Any hint is welcome.... Cheers.
A.
|
|
|
Post by jameyz on Oct 4, 2021 10:09:50 GMT -8
Raven users, first time post here. To get more analog console feeling I ask myself if I can get the raven mixer to not control the DAW fader. It should control the fader of my channel strip simulation. It makes a lot more sense this way ... all Logic faders would stay at unity gain. Any hint is welcome.... Cheers. A. This would ruin the gain staging of DAW and the plugins and the headroom would get seriously out of wack by adjusting gain pre fader.. But this is similar concept to CLA mix hub and Softube console 1, perhaps if we made a RAVEN plugin users could switch between the DAW Faders and the RAVEN plugin output gain.
|
|
|
Post by loveyourself on Oct 5, 2021 15:54:42 GMT -8
... using the strip plug last would work...if that’s not possible a plug in that always gain compensates would do the trick... Assuming that controlling the fader on a console has in influence on the reaction of the electronics it makes sense to get the raven mixer closer to a real console like behavior. I have hope that we see a more intuitive solution to control sends in LogicX soon.
Anyway this was just my 2cents…
|
|