|
|
Post by jsteele5 on May 16, 2020 11:40:28 GMT -8
I am having problems with the raven upon powering on my iMac. When logging in the monitor cycles on and off, during this it also creates havoc with the iMac beginning to flicker. I am running Mac OS 10.15.4, 40 MB of ram, 3.5ghz quad core i5. Any help would be grateful.
|
|
|
|
Post by whittamps on May 20, 2020 21:19:42 GMT -8
I find that if you start up the imac and let the startup status bar get at least 75% across, then turn on the raven that cycling does not occur. If I forget, and the cycling does happen, I turn the Raven off wait a few seconds and then turn it back on. Hope this helps
|
|
|
|
Post by jameyz on May 21, 2020 8:24:16 GMT -8
|
|
|
|
Post by jameyz on May 21, 2020 8:26:20 GMT -8
I am having problems with the raven upon powering on my iMac. When logging in the monitor cycles on and off, during this it also creates havoc with the iMac beginning to flicker. I am running Mac OS 10.15.4, 40 MB of ram, 3.5ghz quad core i5. Any help would be grateful. I guess from our support ticket you also found that you had a bad Thunderbolt 3 adapter?? |
|
