|
Post by synthdogg on May 11, 2019 11:10:21 GMT -8
So, this has been going on since upgrading to Raven 3.6 and I've been ignoring it as I've been tracking this project, but the Raven Internal mixer channel's are not lining up with Logic's mixer channels. the colors are lining up, but the names and fader values are not aligned. Any ideas?
|
|
|
Post by synthdogg on May 11, 2019 12:15:40 GMT -8
Sorry, I just came across this thread: slate.boards.net/thread/981/internal-mixer-banking-alignmentSeems like this may be a larger issue going on. I'm using Logic 10.4.4 and Mac OS 10.14.4 I do use a lot of summing track stacks in Logic, not sure if that causes any issues. The Internal mixer overlay is displaying the channel 8 to the right of the one selected (in the Logic mixer), no matter what I do. If I solo or mute a channel from the overlay, the solo or mute button 8 to the right activates. The weird thing is that the external mixer works, shows the correct channel that is sounding, activates the correct solo/mute/fader.......but it won't show anything too the left of the 8th channel. I can't access channels 1-7 with the external mixer If I open a track stack to show the channels inside, everything moves in both internal and external mixers but is still 8 channels off.
|
|
|
Post by synthdogg on May 12, 2019 6:53:42 GMT -8
Okay, just a bit more info:
- Starting with a blank template, if I have anything less than 8 channels set up in Logic, no faders come up in the Raven overlay. I did a clean install of 3.6. Not sure what else to try.
|
|