|
Post by akdarstudios on Mar 12, 2016 19:11:40 GMT -8
I'm sure this is something simple I overlooked. I just setup 2 MTi2 screens, everything is as it should be, as far as I can tell, except for 1 thing. When I touch the left screen, the right screen reacts, and the same the opposite way. Not sure what I did wrong in my setup? I have a Mac Trashcan, both with mini display port to hdmi cables. Any suggestions? Thanks!
|
|
|
Post by akdarstudios on Mar 13, 2016 7:33:55 GMT -8
So, I figured it out. I had to put the Raven heading bar on the left monitor (#1) and all was good. Now to the learning part!
|
|
|
Post by jameyz on Mar 13, 2016 8:24:16 GMT -8
Which DAW are you on? Are you on El Capitan? If so u may notice touch only on one screen when you restart.. This is a touch driver issue that is being worked on. For this I just unplug one of the USBs from Raven and replug, then all works fine..
|
|
|
Post by akdarstudios on Mar 14, 2016 9:06:18 GMT -8
I'm using Yosemite and Pro Tools 12.4. I still have a lot to learn as far as using the Ravens, I am having a few problems, but I think that is just me not knowing my way around the Raven software yet. I have the mix window on the left main screen and the edit window on the right.
|
|
|
Post by jameyz on Mar 14, 2016 12:27:48 GMT -8
ok, you should be fine with restarting then. Check out this article on how to save window configurations so you can easily align your older sessions. slatemt.zendesk.com/hc/en-us/articles/215813558I am happy to help out if you have any more issues.. Hit us up on slate support..
|
|
drumah
Junior Member
Posts: 60
|
Post by drumah on Mar 15, 2016 13:29:30 GMT -8
Hey Jamey.. Playing with windows configurations.. I have two screens, one raven and one non-raven.. I followed your guide to create two window configs and the associated batch commands to switch between them.. All is good.. mix and edit swap screens for that session.. So, I opened another session and the window configs are gone.. Do I need to import them to every session I am working on?? That doesnt seem to work. I tried to import sesssion data from the first session and click "window configuration", but there is nothing under window configuration in PT.. make any sense or have I been drinking too much -D
|
|
|
Post by jameyz on Mar 15, 2016 16:24:59 GMT -8
Must be the booze. If you import window configurations they all should pop up. But, you do have to do this to all sessions..
|
|
drumah
Junior Member
Posts: 60
|
Post by drumah on Mar 16, 2016 11:10:51 GMT -8
Must be a pro tools thing.. I cant seem to import window configs from another session where I set them up.. Never really played with window configs in PT, so probably something I am doing wrong..
Might need a quick TM call to make sure I am doing it right..
-D
|
|