|
Post by dunnaj on Aug 18, 2015 16:41:38 GMT -8
Hey, sorry if this seems like a simple one. I only got batch commander today. Here's what I'm trying to do.
I've used melodyne to tune some vocals and I want to print the tuned vocals onto a new playlist with the same name with "tuned" added to the end of it. The problem comes when I try to use any of the bounce or freeze functions that I have found. They all seem to want to bounce in stereo and none of them import the audio automatically after.
Let me know if there is something I can do about this.
Thanks
Dunna
|
|
tich
New Member
Posts: 7
|
Post by tich on Aug 19, 2015 9:20:36 GMT -8
Unfortunately from what I can tell it's not currently possible to change the bounce source and import after bounce options with a BC.
A workaround that I've used is to open the bounce window manually (it doesn't matter what's selected since you're going to cancel the bounce anyway), set the desired output, check "Import After Bounce", click Bounce, then quickly press Escape to cancel. Now, any subsequent bounce BCs that you run will use the previously set bounce settings. Obviously this isn't very helpful if it's only for a single bounce, but if you have several that you need to do at the same setting, it can make things a bit easier.
Hope that helps.
Tich
|
|
|
Post by jameyz on Aug 19, 2015 9:47:25 GMT -8
which version of PT are you on?? These are for PT11 Here is one that copies select track name and bounces back in mono. Make sure import after is on.. Copy Name Bounce paste 1 Mono Track.ravbc (2.99 KB)
A slightly faster way, is to bus the melodyne vox to a new aux, and with the aux open use this one, Bounce open Aux Send Mono.ravbc (3.31 KB) If you are on PT11 there is no way to make sure "import after" is on since it is a toggle. Before the script maybe add a dup play list. then after this script, you could add a cut, move up and paste. I think in order to have it move up the melodyne track would have to be on the top of the session since after a bounce PT doesn't let you scroll up to the previous track. the click bounce source is in the "Post" tab but here it is again. CLICK BOUNCE SOURCE.ravbc (311 B)
|
|
tich
New Member
Posts: 7
|
Post by tich on Aug 19, 2015 10:10:33 GMT -8
Amazing what you can find if you just look a little...thanks Jamey!
|
|