gnapier
Junior Member
"Not all who wander are lost..."
Posts: 96
|
Post by gnapier on Feb 3, 2018 14:10:52 GMT -8
Hi Jamey! So a couple of odd things with LPX 10.4 and the mixer(s) I think. 1) The internal mixer overlay is consistently off by 8 channels. I've run Raven set up several times as well as manually set up Logic. I've insured there are no hidden tracks, track stacks, or folders. It's just off. 2) The mixer track/channel scrolling behavior does not seem to work inasmuch as I can't scroll left to the first 8 tracks. (Again, it is offset by 8.) This is true in all mixers (internal, external, and floating). I've uploaded a png showing the offset. Lastly, does the raven mixer behave with track stacks and folders or does that throw it off. I don't remember having problems with it the last time I tried using Raven+Logic, but that was a while ago. Other than this issue, things seem to be operating ok. Thanks for any insights. George
|
|
gnapier
Junior Member
"Not all who wander are lost..."
Posts: 96
|
Post by gnapier on Feb 5, 2018 15:13:02 GMT -8
In case anyone else runs across this issue, here is the fix that worked for me. (And thanks Jamey for the assist via Tech Support.)
1) Make sure that V-Control Pro is set to 24 channels. (Go to V-Control Preferences) 2) As it turns out, I have 6 aux buses that I use as sub-mix tracks, and an aux for rewire. (7 items total.) These show up in the mixer but are NOT on the arrange page. However, when I created tracks for them in the arrange page, the misalignment cut down to 1 or 2 tracks. I then created tracks in the arrange page for both the Stereo Output and Master tracks. Now, everything is aligned.
On my way to figuring this out, I re-installed the software and re-ran set up at some point. Somewhere along the way, I lost UPDD Gestures in the menu bar, so I couldn't load alternate gestures for Cubase, Studio One etc. Completely panicked because I forgot that in the UPDD Gestures app under the "Other Settings" you should scroll all of the way down and check "Show in the Menu Bar" to show the icon in the Menu Bar.
OK. Hope this helps someone.
|
|
|
Post by jameyz on Feb 5, 2018 16:46:49 GMT -8
On my way to figuring this out, I re-installed the software and re-ran set up at some point. Somewhere along the way, I lost UPDD Gestures in the menu bar, so I couldn't load alternate gestures for Cubase, Studio One etc. Completely panicked because I forgot that in the UPDD Gestures app under the "Other Settings" you should scroll all of the way down and check "Show in the Menu Bar" to show the icon in the Menu Bar. When re-installing the UPDD touch driver it will reset all your UPDD Gestures prefs as well. Be sure to save your gestures profile before re-installing UPDD>
|
|