|
Post by xpulsar on Oct 11, 2016 19:19:47 GMT -8
Just got my Raven MTi2 from VK Nashville today. So far it has been a very unsucessful time trying to get basic functionality out of the unit.
Solo's,Mutes and other basic functions not working correctly.
I tried on 2 different computers with different versions of OSX
both i7 processors with 16gb of ram.
One running 10.9.5 and Studio one 3.3.1
the other running 10.10.5 and Studio One 3.3.1
If I can not get this figured out on the next 24 hours I will be returning the MTi2
I am no newbie and have been professionally Engineering and mixing for 15+ years.
Pretty frustrated with the advertising saying that the Raven is all working great with studio one.
-Collin
|
|
|
Post by jameyz on Oct 13, 2016 18:06:56 GMT -8
Have you turned off the correct gestures and enabled TUIO in studio one?? Is the UPDD console set to the correct screen if you are using multiple screens? Set to monitor 1 works best. Be sure to make Raven the main display also..
|
|
vyero
New Member
Posts: 6
|
Post by vyero on Nov 16, 2016 18:25:08 GMT -8
I have the same issue.. Whenever I push the buttons (inside Studio One or in the Batch commander) it functions for a millisecond and the returns to the original setting... i have to press it for a long time.
|
|
|
Post by jameyz on Nov 17, 2016 7:31:10 GMT -8
I have the same issue.. Whenever I push the buttons (inside Studio One or in the Batch commander) it functions for a millisecond and the returns to the original setting... i have to press it for a long time. slatemt.zendesk.com/hc/en-us/articles/218709057-Studio-One-SetupFile a support ticket slate support.com You may have the wrong gestures set up
|
|
vyero
New Member
Posts: 6
|
Post by vyero on Nov 21, 2016 22:03:00 GMT -8
Thank you so much!!!... it is resolved!
|
|