JP
New Member
Posts: 1
|
Post by JP on Jan 2, 2020 11:07:07 GMT -8
Hello, all:
Brand new owner of two MTi2s. I've currently got them set up as two displays running through a dock, hooked up to an iMac (2017). I'm running the latest version MacOS (Catalina, 10.15.2), and current version of Pro Tools Ultimate (2019.12, I think?)
The Raven software seems to run just fine, but none of the meters seem to be showing up in Pro Tools when aligned with the mixer window. It's about as aligned as I could make it - gray bars are matched and the red line is where it's supposed to be.
I've done the window alignments in Pro Tools, made sure that the MTi2s are running at 1080p, banking preferences in Pro Tools, sys preferences are what they are, all that jazz. No matter what I do, I can't get them to show up. This is the only problem with the MTi2s; otherwise, everything else is running pretty well. Barring that I don't get this working, I see my current work around being that I use the external/floating mixer.
Any ideas? Should I also send in a support ticket?
Picture is attached here as well.
Thanks in advance!
-JP
|
|
|
Post by budboy on Jan 3, 2020 18:03:00 GMT -8
Having the same issue no meters and the race will not match color as well. Done everything I can think of. Just upgraded to a Mac Pro and OS 10.15.2
I would love to figure this out too.
|
|
|
Post by jameyz on Jan 4, 2020 11:43:38 GMT -8
Hello, all:
Brand new owner of two MTi2s. I've currently got them set up as two displays running through a dock, hooked up to an iMac (2017). I'm running the latest version MacOS (Catalina, 10.15.2), and current version of Pro Tools Ultimate (2019.12, I think?)
The Raven software seems to run just fine, but none of the meters seem to be showing up in Pro Tools when aligned with the mixer window. It's about as aligned as I could make it - gray bars are matched and the red line is where it's supposed to be.
I've done the window alignments in Pro Tools, made sure that the MTi2s are running at 1080p, banking preferences in Pro Tools, sys preferences are what they are, all that jazz. No matter what I do, I can't get them to show up. This is the only problem with the MTi2s; otherwise, everything else is running pretty well. Barring that I don't get this working, I see my current work around being that I use the external/floating mixer.
I can see the top of your PT meters so this looks like your Mix window is maximized. be sure to hold down OPTION while clicking the GREEN maximize button to fit the Pro Tools Mix window to the Raven screen. slatemt.zendesk.com/hc/en-us/articles/215813558-Pro-Tools-Internal-Mixer-AlignmentHere is the spot in the video.
|
|
|
Post by jameyz on Jan 4, 2020 11:44:05 GMT -8
Having the same issue no meters and the race will not match color as well. Done everything I can think of. Just upgraded to a Mac Pro and OS 10.15.2 I would love to figure this out too. You mixer is probably just off by a few pixels. File a support ticket and we can get it aligned.
|
|
|
Post by budboy on Jan 7, 2020 17:25:11 GMT -8
Spent time with Raven support. It seems Catalina needs to allow screen sharing for any daw software. Once that is allowed the Raven software will snap and show meters etc.
check your system prefs and make sure screen sharing is allowed.
good luck.
|
|
|
Post by redlinemusic on Jan 7, 2020 20:43:45 GMT -8
I'm faced with the same issue. Installed Catalina and mixer window isn't overlaying correctly. I've look at the system prefs and turned on screen sharing but that didn't help. What now?
|
|
Gerr
New Member
Posts: 2
|
Post by Gerr on Jan 8, 2020 18:16:24 GMT -8
I'm faced with the same issue. Installed Catalina and mixer window isn't overlaying correctly. I've look at the system prefs and turned on screen sharing but that didn't help. What now? Same thing here...no meters and no colors on Raven mixer (Catalina 10.15.2 Pro Tools 2019.12.0)
|
|
|
Post by jameyz on Jan 9, 2020 9:26:12 GMT -8
I'm faced with the same issue. Installed Catalina and mixer window isn't overlaying correctly. I've look at the system prefs and turned on screen sharing but that didn't help. What now? Did you check on RAVEN in the there??? If so that fixed the issue for all other users..
|
|
|
Post by jameyz on Jan 9, 2020 9:26:22 GMT -8
I'm faced with the same issue. Installed Catalina and mixer window isn't overlaying correctly. I've look at the system prefs and turned on screen sharing but that didn't help. What now? Same thing here...no meters and no colors on Raven mixer (Catalina 10.15.2 Pro Tools 2019.12.0) Here is the link to start a support ticket for the Raven. slatemediatechnology.zendesk.com/hc/en-us/requests/new
|
|
|
Post by jameyz on Jan 9, 2020 9:27:06 GMT -8
|
|
|
Post by severe on Jan 4, 2022 10:10:36 GMT -8
In my case, the RAVEN won’t align (same issue as above) if it’s not set as the main display in my dual RAVEN setup with an additional non-touch display.
I’d already reached out to support.
M1 mini, Monterey 12.1
Looking forward to Monterey support.
|
|