jiben
New Member
Posts: 20
|
Post by jiben on Dec 19, 2018 11:50:20 GMT -8
Hi Jamey The Raven MTI2 is aligned with Cubase 10. The multitouch is running. Everything is ok... except the main.... the VMR. I cannot use the VMR. It's impossible to manage properly the modules with fingers (it doesn't run with mouse).
If you have an idea or opinion it could be cool (-; Berst regards. Jiben (It's perfectly running with third part plug-ins, but the VMR is the main I do use... And one more time, sorry for my english !)
|
|
|
Post by Slate Media Technology on Dec 19, 2018 15:25:57 GMT -8
Hi Jamey The Raven MTI2 is aligned with Cubase 10. The multitouch is running. Everything is ok... except the main.... the VMR. I cannot use the VMR. It's impossible to manage properly the modules with fingers (it doesn't run with mouse).
If you have an idea or opinion it could be cool (-; Berst regards. Jiben (It's perfectly running with third part plug-ins, but the VMR is the main I do use... And one more time, sorry for my english !) VMR currently doesn't support Window Native Touch, so you will have to you use the Mouse for dragging and dropping modules. After dragging and dropping, the knobs should work well with touch. We hope to have an updated version of VMR with Window Native Touch support in the next few months.
|
|
jiben
New Member
Posts: 20
|
Post by jiben on Dec 21, 2018 3:38:46 GMT -8
Thanks for your reply. I understand the problem with VMR and Window Native Touch. And Yes, it could be cool, to work in a right way with Slate Plugs as a Slate Raven and VMS user.... But my real problem is : most of time I cannot drag and drop modules with mouse neither call any presets with fingers or mouse ! When I open a new VMR instance sometimes I can drag and drop module for few seconds, as I can scroll in the preset menu, with mouse or finger, but I cannot select a preset, cause there is each time a bug with presets or module I can fix when I shut down the Raven. And I waste lot of times with those issues. Maybe It's due to my graphic card or my system, but I can 't know. Here is my set up :
PC Windows 10 pro - Version 1803
Intel 6 Core I7-3930K - 3.20GHz System : hard drive SSD 256 Go Virtual instruments on SSD 500 Go 2 7000 Trm Hard Drive x 2 To
Ram : 24,0 Go 16 touch points NVIDIA GeForce GT 610
Cubase 10 Pro VMS-VMR Everything bundle 2.2.8.1 Raven Mti2 Dual Core station : 3.5.3
And Here is a picture of my station. Best regards Jiben
Attachments:
|
|
|
Post by jameyz on Dec 21, 2018 10:18:10 GMT -8
Yes, as soon as you touch VMR it will no longer work with the mouse.
|
|
jiben
New Member
Posts: 20
|
Post by jiben on Dec 22, 2018 8:08:33 GMT -8
Ok ! Thanks Jamey ! It's almost working with this way. But after trying to work on this issue and others, I notice there are lot of crashes with the new Cubase 10 and it's not by the Raven or VMR fault. It's the first time I update Cubase few days after release and it's a fucking mistake ! One more thanks ! Jiben
|
|