|
Post by casadelaiguana on Mar 1, 2016 16:07:31 GMT -8
Hello to all.
I have both pieces of gear, the Raven MTI2 and the Avid Artist control surface.
Anyone has try them together?
Any advice?
Thanks!!
|
|
|
Post by jameyz on Mar 1, 2016 17:06:27 GMT -8
They will work together, you will just not see meters on the floating or external mixers when EUCON is enabled. Somehow EUCON blocks the HUI sent for the Meters..
|
|
|
Post by casadelaiguana on Mar 2, 2016 8:28:55 GMT -8
thank you Jameyz, that is good info.
Do you think that eventually both units can work together in peace and harmony?
Regards from Colombia!!
|
|
|
Post by studio22music on Mar 2, 2016 10:46:44 GMT -8
eucon run seamless wit mti2 in my set up the only iPad remote daw out of pro remote daw remote Daw control and logic remote thats I've got working and playing with the raven ...
i have eucon running on start up(don't start PT control) *start Logic after logics up *start raven after raven up *start Pt|control i get meters on *ALL* mixers
Hope this helps
|
|
|
Post by casadelaiguana on Mar 3, 2016 10:25:51 GMT -8
Thank you studio22music!! Regards from sunny Colombia!!
|
|
|
Post by studio22music on Mar 9, 2016 16:02:42 GMT -8
|
|
|
Post by casadelaiguana on Mar 10, 2016 4:19:26 GMT -8
Nice setup!!!!
|
|
drumah
Junior Member
Posts: 60
|
Post by drumah on Mar 10, 2016 7:37:03 GMT -8
I think its funny that people keep that ugly ass sticker on the bottom of their ravens Such a pet peeve of mine I guess. Nice slick look without that sticker on the bottom left of the frame.. lol -D
|
|
gerk
Junior Member
Posts: 58
|
Post by gerk on Mar 12, 2016 8:31:06 GMT -8
I think its funny that people keep that ugly ass sticker on the bottom of their ravens Such a pet peeve of mine I guess. Nice slick look without that sticker on the bottom left of the frame.. lol -D I'm with you on that one. I HATE those things, they are stupid ugly and they are hard to take off properly because they used some sort of super glue type stuff to stick them on with. If you don't know all the features that the unit has by the time you have it out of the box and are setting it up looking at the stupid sticker on it is not going to make a difference ...
|
|
|
Post by studio22music on Mar 13, 2016 13:01:51 GMT -8
Lol Understandable drumah ,but I use the sticker to keep my keyboard and mouse pad Centertered with the left keyboard edge linings up between sticker 5&6 Most on here complain about mixer alighment lol I don't but I got to have my keyboard center in my stereo field *pet peeve 2nd'ly I got the raven to replace my mackie control on that fact I got 24faders @ $1000 Vs the same 8faders I've had from mackie @ $1100 So realy all I know bout this thing is it's a touch mixers so when all my regular clients I've had Over the 10year life span of the mackie control unit come in and ask "what's that"? I say "it's a touch mixer but do way more if u look at them stickers" lmao...no long convo back to the music at hand! So yeah it's crazy useful .... Then there's what last dude sayed "there hard to take of propperly" ??so why wast the time and enery to take it off the sticker ,have to clean the glue & raven up ,then have to have assorted convos about the Raven .. If we are all here on Raven to in crease work flow Lmao none off Thow steps will hahaha .. Gues I'm about working
|
|
|
Post by soundrats on Nov 25, 2016 8:30:17 GMT -8
eucon run seamless wit mti2 in my set up the only iPad remote daw out of pro remote daw remote Daw control and logic remote thats I've got working and playing with the raven ... i have eucon running on start up(don't start PT control) *start Logic after logics up *start raven after raven up *start Pt|control i get meters on *ALL* mixers Hope this helps Hi out there, is there any chance do do this "trick" with Protools and without Logic Cheers and thnx
|
|
|
Post by jameyz on Nov 25, 2016 9:52:19 GMT -8
eucon run seamless wit mti2 in my set up the only iPad remote daw out of pro remote daw remote Daw control and logic remote thats I've got working and playing with the raven ... i have eucon running on start up(don't start PT control) *start Logic after logics up *start raven after raven up *start Pt|control i get meters on *ALL* mixers Hope this helps Hi out there, is there any chance do do this "trick" with Protools and without Logic Cheers and thnx Just enable Eucon in Pro Tools Peripherals and enable HUI in the Midi controllers. Raven and Artist mix will work fine in Pro tools, however EUCON will steal the meters from the Floating and External Mixer.
|
|