|
Post by toobalz on Feb 10, 2016 11:13:03 GMT -8
Hi, I bought a Raven MTi 2; yesterday all well; today I connected it with a 5 meter VGA cable and a 3 meter USB cable. Power on, MAC sees it like a common VGA, UPDD doesn't see it as the MTI (but UPPD sees it's USB plugged), but into the UPDD monitor list Raven MTI doesn't appear at all. Also, UPDD status reports "Controller type: Slate Media Technology, Raven, USB; State: enabled" I'm on a El Capitan, but yesterdaym repeat, also with the known bug, it was smooth. Tried to reinstall drivers 3 times, nothing going on; now I', running at 1600x1200, and obviously the bar goes out of the screen... What can I do? Thanks
|
|
|
Post by jameyz on Feb 10, 2016 13:26:49 GMT -8
|
|
|
Post by toobalz on Feb 10, 2016 14:30:53 GMT -8
Hi James, thanks for the quick reply. None of the adviced worked. I'm working with only the MTi now, yesterday i worked with 3 screens, MTi included, and everything was fine...Maybe the VGA cable I buyed created some problem? Here you are a couple of photo.
Attachments:
|
|
|
Post by jameyz on Feb 10, 2016 15:56:04 GMT -8
where it says "whole" on the UPDD should be set to "monitor 1" also you will need to change your screen resolution in system prefs to 1920 X 1080
|
|
|
Post by toobalz on Feb 11, 2016 5:20:28 GMT -8
Was the cable, indeed! first I removed every connection, then put the Mti exactly like when it weny fine. Surprise: all fine...so reconnected the new 15 feet cable: again problems. Now is ok, except for the known El Capitan bugs. Thanks James!
|
|