mike
New Member
Posts: 23
|
Post by mike on Apr 9, 2015 11:11:59 GMT -8
My calibrate opp only works in one raven at a time, if i try to calibrate bouth ravens the second doesn´t accept the calibration... if i disconect one raven both calibrate but when i switch both for dual display only one gets calibrated...
Any idea why?
|
|
|
Post by jameyz on Apr 9, 2015 14:35:42 GMT -8
My calibrate opp only works in one raven at a time, if i try to calibrate bouth ravens the second doesn´t accept the calibration... if i disconect one raven both calibrate but when i switch both for dual display only one gets calibrated... Any idea why? If you switch the serial number that is selected in the multi-touch app to the other screen then hit calibrate it should work.. peace
|
|
mike
New Member
Posts: 23
|
Post by mike on Apr 10, 2015 0:53:06 GMT -8
My calibrate opp only works in one raven at a time, if i try to calibrate bouth ravens the second doesn´t accept the calibration... if i disconect one raven both calibrate but when i switch both for dual display only one gets calibrated... Any idea why? If you switch the serial number that is selected in the multi-touch app to the other screen then hit calibrate it should work.. peace I saw that option in the app, but only my first raven serial number is show there, no second serial number available of my new raven is show there!!! that serial is detected when the usb cable is pluged? could be a usb detection bus problem...
|
|
mike
New Member
Posts: 23
|
Post by mike on Apr 10, 2015 0:54:58 GMT -8
My calibrate opp only works in one raven at a time, if i try to calibrate bouth ravens the second doesn´t accept the calibration... if i disconect one raven both calibrate but when i switch both for dual display only one gets calibrated... Any idea why? If you switch the serial number that is selected in the multi-touch app to the other screen then hit calibrate it should work.. peace And how is that number is available if to calibrate the second raven i need to disconnect that raven???
|
|
mike
New Member
Posts: 23
|
Post by mike on Apr 10, 2015 2:42:41 GMT -8
NEW tests!!
i only Achive to have one raven calibrated even disconneting the second raven, and when i run logic with 1 raven and 2 screens raven, the calibrating with raven software is ok, but the nifi is not working properly with with vcontrol, so when i move in raven mixer the faders they don´t move in logic mixer!!!
i have a work a big work in 2 days i appreciate some good help here, i have been arround reading all info about 2 ravens mti install, and also tutorials and is really pour !!! i had it working ok with one mti and PRotools no problems, but with 2 ravens MTI no way!!! i´m in last version of mac osx yosemite with a 12 core... NEED SOME HELP PLEASE!!!
|
|
mike
New Member
Posts: 23
|
Post by mike on Apr 10, 2015 3:32:44 GMT -8
Also i don´t have 2 serials in drop down menu of the app for calibrate raven only one appears!!! i´m using Version 4.1405 build 110259
|
|
|
Post by jameyz on Apr 10, 2015 8:20:19 GMT -8
are you display setup like this in the arrangement view??
|
|
|
Post by jameyz on Apr 10, 2015 13:21:08 GMT -8
for anyone else with Dual Ravens..
Looks like an uninstall then reinstall of the multitouch software did the trick... Also using configure composite will allow multitouch on both monitors...
peace
|
|
mike
New Member
Posts: 23
|
Post by mike on Jul 16, 2015 2:37:55 GMT -8
i put a thrid screen and now is happening the same problem i had with cfg the composite only one raven is detected... at a time... in the serials only appears one raven, i need to disconnect one usb to the other appear in the serial
|
|
|
Post by jameyz on Jul 16, 2015 8:39:31 GMT -8
Do a complete uninstall of the multitouch software and reinstall with both screens plugged in. If u originally installed with one screen this could be the issue.
|
|
|
Post by jameyz on Jul 16, 2015 8:42:09 GMT -8
i put a thrid screen and now is happening the same problem i had with cfg the composite only one raven is detected... at a time... in the serials only appears one raven, i need to disconnect one usb to the other appear in the serial So u have 2 Ravens plugged in and only one pops up in the MTplatform? If this is the case I think a reinstall of Raven should do it. Also there should be an uninstall on your computer for the MTplatform.
|
|
mike
New Member
Posts: 23
|
Post by mike on Jul 17, 2015 2:21:51 GMT -8
i put a thrid screen and now is happening the same problem i had with cfg the composite only one raven is detected... at a time... in the serials only appears one raven, i need to disconnect one usb to the other appear in the serial So u have 2 Ravens plugged in and only one pops up in the MTplatform? If this is the case I think a reinstall of Raven should do it. Also there should be an uninstall on your computer for the MTplatform. Yes exactly, that happends when i bought the second raven, and we resolve the problem with slat Supp. but now i bought and active dvi and plugged a 3 screen and same situation append... one raven is gone in multitouch platform app. to calibrate... i will try now to reinstall it and leave a feedback. TKS man for help.
|
|
mike
New Member
Posts: 23
|
Post by mike on Jul 18, 2015 2:58:40 GMT -8
Just to let you know ppl, that i specked with supp. and raven´s do not support more normal screens working with multitouch dual ravens... you can work with more screens and only one raven gives multitouch not dual!!!, i have a dual system when you plug a third screen i can only calibrated one raven, the other ravens and screeens act has normal screens....
So if you intend to use dual raven system mti do not connect more screens or you lose the calibration and use of ravens, they act has normal screens!!!
Supp is working to improve this and resolve this problem.
|
|
|
Post by Slate Media Technology on Jul 20, 2015 7:25:46 GMT -8
Thanks for sharing Mike.
It is a limitation with some of the drivers. We are working to resolve this.
Kind Regards,
— Trevor Fedele Product Specialist Slate Media Technology // Slate Digital LLC trevor@stevenslate.com
|
|
|
Post by jameyz on Jul 20, 2015 7:40:07 GMT -8
Just to let you know ppl, that i specked with supp. and raven´s do not support more normal screens working with multitouch dual ravens... you can work with more screens and only one raven gives multitouch not dual!!!, i have a dual system when you plug a third screen i can only calibrated one raven, the other ravens and screeens act has normal screens.... So if you intend to use dual raven system mti do not connect more screens or you lose the calibration and use of ravens, they act has normal screens!!! Supp is working to improve this and resolve this problem. That is too bad about the 3rd screen with dual.. I am sure a fix will be possible.. But for now.. Would you be able to "Airplay" the video screen to an apple TV device?? or do something wirelessly?? This way the mac doesn't really see the screen as another monitor.. just a thought, hope this helps..
|
|
mike
New Member
Posts: 23
|
Post by mike on Oct 16, 2015 3:05:50 GMT -8
Just to let you know ppl, that i specked with supp. and raven´s do not support more normal screens working with multitouch dual ravens... you can work with more screens and only one raven gives multitouch not dual!!!, i have a dual system when you plug a third screen i can only calibrated one raven, the other ravens and screeens act has normal screens.... So if you intend to use dual raven system mti do not connect more screens or you lose the calibration and use of ravens, they act has normal screens!!! Supp is working to improve this and resolve this problem. That is too bad about the 3rd screen with dual.. I am sure a fix will be possible.. But for now.. Would you be able to "Airplay" the video screen to an apple TV device?? or do something wirelessly?? This way the mac doesn't really see the screen as another monitor.. just a thought, hope this helps.. Tks THat bt the idea Jameyz that may help me, but supp also told me that when 3.0 comes out that is no problem anymore...
|
|
|
Post by mhuang on Oct 21, 2015 23:17:03 GMT -8
@raven support has the 3rd monitor issue been resolved in 3.0?
|
|
|
Post by jameyz on Oct 22, 2015 12:48:00 GMT -8
@raven support has the 3rd monitor issue been resolved in 3.0? Yes It has. You will be able to use 2 Ravens and 1 external monitor. I am not sure what kind of spitters will be needed to do this. I guess depending on your computer you may need a thunderbolt or powered DVI splitter..
|
|
|
Post by pfreeman on Oct 23, 2015 6:31:35 GMT -8
How do you manually uninstall BC2.5? Ever since I installed it - PT10, 11 & 12 will only start up with both mix & edit windows on the primary screen. I have to make a window configuration to correct the issue. Thanks
|
|
|
Post by jameyz on Oct 23, 2015 9:26:42 GMT -8
How do you manually uninstall BC2.5? Ever since I installed it - PT10, 11 & 12 will only start up with both mix & edit windows on the primary screen. I have to make a window configuration to correct the issue. Thanks Should be able to just delete the app.. There also is a "Slate Media" folder in user-library-appsupport. But I think it is probably something else since that is a pro tools preferences. When ever I open sessions that were using 2 monitors they open up exactly right every time, without the need for a window config. I would try clearing your PT prefs. Hope this helps.
|
|