|
Post by Nashville joe on Dec 7, 2018 11:37:30 GMT -8
i am considering getting an MTi interface and using it with DP- anyone using the configuration with the MTi as opposed to the MTi2.
additionally, i use a Digital Board a DM4800 Tascam which also has a control surface - is it possible to use multiple HUi devices- Can the MTi be used with multiple control surfaces such as a DM4800 board with a control surface overlay-
thanks in advance for any feedback.....
|
|
|
Post by jameyz on Dec 7, 2018 13:56:33 GMT -8
i am considering getting an MTi interface and using it with DP- anyone using the configuration with the MTi as opposed to the MTi2. additionally, i use a Digital Board a DM4800 Tascam which also has a control surface - is it possible to use multiple HUi devices- Can the MTi be used with multiple control surfaces such as a DM4800 board with a control surface overlay- thanks in advance for any feedback..... DP doesn't support multiple DAW controllers at once, since each port is a bank of 8 faders. Both of your controllers would get messed up and only be able to control every other bank of 8 faders. Cubase and Studio One do support this feature though. Also, you can do it in Pro Tools if your 2nd controller is EUCON and the 1st is HUI.
|
|