eddi
New Member
Posts: 8 
|
Post by eddi on Apr 2, 2018 11:17:15 GMT -8
Hello,
I‘ working with 2 MTI‘s on imac and logic pro x.
After modification my studio and new cabling, the batch commander is on imac.
MTI middle is main monitor and screen 1
imac on left side is screen 2
MTI on right side is screen 3.
When starting logic, the raven faders are in the middle screen and batch commander is on middle screen(Raven 1) and left screen (imac).
What‘s wrong?
Eddi
|
|
|
|
Post by jameyz on Apr 2, 2018 12:35:45 GMT -8
Hello, I‘ working with 2 MTI‘s on imac and logic pro x. After modification my studio and new cabling, the batch commander is on imac. MTI middle is main monitor and screen 1 imac on left side is screen 2 MTI on right side is screen 3. When starting logic, the raven faders are in the middle screen and batch commander is on middle screen(Raven 1) and left screen (imac). What‘s wrong? Eddi The Raven works well with the iMac screen, however the Raven will need to be the main screen. Here is an article that should help explain how to setup Raven and iMac slatemt.zendesk.com/hc/en-us/articles/226350487-Raven-and-iMac-setupHere is the calibration video. |
|
eddi
New Member
Posts: 8
|
Post by eddi on Apr 4, 2018 8:39:38 GMT -8
Hello Jamey, Raven is my main screen and the other MTI is the third screen. Status and calibration is ok. Only the batch commander is on iMac (on the left side). I hope you can see it on photo?  |
|
|
|
Post by jameyz on Apr 4, 2018 8:46:20 GMT -8
Hello Jamey, Raven is my main screen and the other MTI is the third screen. Status and calibration is ok. Only the batch commander is on iMac (on the left side). I hope you can see it on photo? You are gonna have to move the iMac location in display prefs. I would move it to be above the 2 RAVENs as the left most screen needs to be the RAVEN so the toolbars show up correctly. slatemt.zendesk.com/hc/en-us/articles/115010785028-CORE-Station-RAVEN-MTi2-Dual-Logic-Pro |
|
