|
|
Post by waxman on Feb 7, 2018 17:26:33 GMT -8
Had to do with the hub I am using. Even though it worked with 3.3.2 it would not work with 3.5. The new 3.5 update has so much potential. So far I can only get the channel strip to float above the big Raven mixer. But it follows selection so much better. Experimenting with different mixing template layouts. Also the blocks for windows can just be colors that follow the DP color scheme. I think that will work better then pics for grouping instruments at this point... ala PT... I'll be up all night now... crap... (SOLVED)UPDD is not recognizing touch in configure. I am using Sierra.. do I need to use an older version of the UPDD? If so do I need to roll back then not install the new UPDD in the 3.5 update? V-Pro is showing both Ravens. The status in the UPDD is showing OK on both Raven, USB Mon. Any ideas on what to do next? Thanks Macbook Pro touch bar 2017 model and the Landing Zone Hub with a USB 3 Hub 7 slots. Once I put the Ravens directly into the Landing Zone it all worked. |
|
|
|
Post by waxman on Feb 7, 2018 20:09:33 GMT -8
screens Attachments:
|
|
|
|
Post by toodamnhip on Feb 7, 2018 20:39:18 GMT -8
With all the craziness with Sierra, not just HIGH Sierra, (I am on Sierra), I am going to watch and wait until someone gives me an “all clear” I look forward to the improved Aux faders GUI. I also hope custom icons has been improved and can somehow be made to work from the same folder so that icons imported into DP8 can also show in DP 9.
Watching, waiting ....dave
|
|
|
|
Post by waxman on Feb 7, 2018 21:11:25 GMT -8
Yeah wait... I've rolled back and now I can't get the touch UPDD to work. Something is wacked. But it could be the new laptop and Landing zone hub. who knows. I'll let you know when I have it working. BTW I am on Sierra. I am skipping High Sierra at this point. UAD is still having issues HS...
|
|
|
|
Post by waxman on Feb 7, 2018 22:52:39 GMT -8
With all the craziness with Sierra, not just HIGH Sierra, (I am on Sierra), I am going to watch and wait until someone gives me an “all clear” I look forward to the improved Aux faders GUI. I also hope custom icons has been improved and can somehow be made to work from the same folder so that icons imported into DP8 can also show in DP 9. Watching, waiting ....dave Ok TDH... all is well in waxman land. The new 3.5 update is happening. |
|
|
|
Post by jameyz on Feb 8, 2018 9:53:49 GMT -8
Had to do with the hub I am using. Even though it worked with 3.3.2 it would not work with 3.5. The new 3.5 update has so much potential. So far I can only get the channel strip to float above the big Raven mixer. But it follows selection so much better. Experimenting with different mixing template layouts. Also the blocks for windows can just be colors that follow the DP color scheme. I think that will work better then pics for grouping instruments at this point... ala PT... I'll be up all night now... crap... (SOLVED)UPDD is not recognizing touch in configure. I am using Sierra.. do I need to use an older version of the UPDD? If so do I need to roll back then not install the new UPDD in the 3.5 update? V-Pro is showing both Ravens. The status in the UPDD is showing OK on both Raven, USB Mon. Any ideas on what to do next? Thanks Macbook Pro touch bar 2017 model and the Landing Zone Hub with a USB 3 Hub 7 slots. Once I put the Ravens directly into the Landing Zone it all worked. Any time you re-install the touch driver you will need to re-configure the displays as the re-install just wiped all the settings back to default. This was mentioned in the release notes: Raven 3.5 Release Notes new.pdf (213.11 KB) |
|
|
|
Post by waxman on Feb 8, 2018 11:04:39 GMT -8
Had to do with the hub I am using. Even though it worked with 3.3.2 it would not work with 3.5. The new 3.5 update has so much potential. So far I can only get the channel strip to float above the big Raven mixer. But it follows selection so much better. Experimenting with different mixing template layouts. Also the blocks for windows can just be colors that follow the DP color scheme. I think that will work better then pics for grouping instruments at this point... ala PT... I'll be up all night now... crap... (SOLVED)UPDD is not recognizing touch in configure. I am using Sierra.. do I need to use an older version of the UPDD? If so do I need to roll back then not install the new UPDD in the 3.5 update? V-Pro is showing both Ravens. The status in the UPDD is showing OK on both Raven, USB Mon. Any ideas on what to do next? Thanks Macbook Pro touch bar 2017 model and the Landing Zone Hub with a USB 3 Hub 7 slots. Once I put the Ravens directly into the Landing Zone it all worked. Any time you re-install the touch driver you will need to re-configure the displays as the re-install just wiped all the settings back to default. This was mentioned in the release notes: Yes I attempted the re-configure after the re-install. Problem was there was NO touch. This pic is probably the source of my problems. Once I plugged directly in the Landing Zone it was fine. It's worked up to now but the drivers must be non compatible now. It seems to work fine with drives and key controllers, iLok, apple usb keyboard. Just figuring it out man. Change one thing and it's Derek and the Dominos... anyway thanks for all the help JZ... ps.. SS was hysterical when the marching band interrupted. That was classic. Attachments:
|
|
|
|
Post by jameyz on Feb 8, 2018 14:12:35 GMT -8
Any time you re-install the touch driver you will need to re-configure the displays as the re-install just wiped all the settings back to default. This was mentioned in the release notes: Yes I attempted the re-configure after the re-install. Problem was there was NO touch. This pic is probably the source of my problems. Once I plugged directly in the Landing Zone it was fine. It's worked up to now but the drivers must be non compatible now. It seems to work fine with drives and key controllers, iLok, apple usb keyboard. Just figuring it out man. Change one thing and it's Derek and the Dominos... anyway thanks for all the help JZ... ps.. SS was hysterical when the marching band interrupted. That was classic. You should at least plug in direct when you are calibrating the displays, then plugin to the hub after. |
|
|
|
Post by waxman on Feb 8, 2018 15:03:16 GMT -8
Thanks Jamey... I am leaving them in the Landing Zone hub. But yes I tried moving them back and it worked. So you are correct.
|
|
