fscm1
New Member
Posts: 1
|
Post by fscm1 on Jul 20, 2017 11:48:37 GMT -8
Hello Everyone,
I have a 2013 MBP and I am now connecting it to my MTI2 in the following way Display Port to DVI adaptor > DVI-M/HDMI-F adaptor > HDMI cable into MTI2. Everything works perfectly until i get ready to power down my system. When the adaptor is plugged in, my MBP will keep powering on until I unplug the adaptor. I switched from VGA to see if HDMI would look better and i noticed that issue. I've used the same setup with other monitors and never had an issue, just wondering if this is something that the MTI does.
Thanks in advance
|
|
|
Post by jameyz on Jul 21, 2017 7:57:35 GMT -8
Hi,
This seems like a lot of connectors. Can you just buy a HMDI to Mini-Display Port cable???
Also, you could reset the P.RAM
1. Shut down your Mac. 2. Locate the following keys on the keyboard: Option, Command (⌘), P, and R. You will need to hold these keys down simultaneously in step 4. 3. Turn on your Mac. 4. Immediately press and hold the Option-Command-P-R keys. You must press this key combination before the gray screen appears. ... 5. Release the keys.
|
|
|
Post by Mr.609 on Jul 22, 2017 4:18:31 GMT -8
I kno there's a thunderbolt to hdmi adapter. I'd at least get that.
|
|