|
Post by briansteckler on Jan 31, 2017 11:31:58 GMT -8
Hey Jamey,
I'm getting intermittent success with this command. Sometimes if I switch it to "Wait for Window 3" it works. Sometimes it shows up as "LOGIC WAIT FOR BOUNCING WINDOW" which usually works, but then when I go to fix BCs with other ones in it, that one isn't in the QuickList. Driving me a little nuts... can you see if you can find/make a reliable "Wait for Bounce" function?
-brian
|
|
|
Post by jameyz on Jan 31, 2017 11:47:32 GMT -8
Hey Jamey, I'm getting intermittent success with this command. Sometimes if I switch it to "Wait for Window 3" it works. Sometimes it shows up as "LOGIC WAIT FOR BOUNCING WINDOW" which usually works, but then when I go to fix BCs with other ones in it, that one isn't in the QuickList. Driving me a little nuts... can you see if you can find/make a reliable "Wait for Bounce" function? -brian When a BC is unpacked, i.e. saved and re added to a script, you are seeing the actual name of the script, which is different from the BC name. Maybe you have an extra window open so the WAIT isn't working??
|
|
|
Post by briansteckler on Jan 31, 2017 16:08:11 GMT -8
I went back to "Wait for Open Window to Close" which seems to be working.
My crazy Stem Printing BC is finally working right, i think.
|
|