Raven auto setup issue

wedoh
New Member

Posts: 13

Raven auto setup issue Oct 26, 2016 7:36:57 GMT -8

Quote

Post by wedoh on Oct 26, 2016 7:36:57 GMT -8

Hi,
I use a mti 2 model with Cubase 8.5 and OS X 10.12.
I setup my computer and daw according to the video startup guide, aswell as the manual.
I had to setup Raven manually inside of Cubase due because the auto setup function did not start.

The thing is, now the raven interface seems to be working but its not running smoothly all the time so it feels like its not properly configured.
sometimes the faders not responding and the external mixer not showing the channels available. The nav pad does notseem to work as it should either, and the yellow squares on the buttom of the faders dont seem to be correctly alligned.
also when i choose a channel it seems to automaticly make it rec armed but my guess is that that is a setting inside of cubase.

could this be bugs due to the cubase version still in beta?

Best regards
Johan

jameyz
God

Groovin and Movin

Posts: 4,291

Raven auto setup issue Oct 26, 2016 8:57:28 GMT -8 wedoh likes this

Quote

Post by jameyz on Oct 26, 2016 8:57:28 GMT -8

Oct 26, 2016 7:36:57 GMT -8 wedoh said:

Hi,
I use a mti 2 model with Cubase 8.5 and OS X 10.12.
I setup my computer and daw according to the video startup guide, aswell as the manual.
I had to setup Raven manually inside of Cubase due because the auto setup function did not start.

Did you add Raven and other apps into accessibility???

Oct 26, 2016 7:36:57 GMT -8 wedoh said:

The thing is, now the raven interface seems to be working but its not running smoothly all the time so it feels like its not properly configured.
sometimes the faders not responding and the external mixer not showing the channels available.

There is a little bug where if you open a session without 24 tracks in it the first time then Raven will not draw the faders. Try just closing and reopening the project if this happens.

Check out this other fix too. slatemt.zendesk.com/hc/en-us/articles/227911807-Cubase-Raven-not-showing-Faders-when-Opening-Project-

Oct 26, 2016 7:36:57 GMT -8 wedoh said:

The nav pad does notseem to work as it should either

The navpad uses key commands G and H to zoom, so if these aren't working perhaps you have something setup incorrectly in the UPDD Gestures.

slatemt.zendesk.com/hc/en-us/articles/216754667-Setting-up-extra-UPDD-Gestures

Oct 26, 2016 7:36:57 GMT -8 wedoh said:

and the yellow squares on the buttom of the faders dont seem to be correctly alligned. and the yellow squares on the buttom of the faders dont seem to be correctly alligned.

To align the Raven Internal Mixer with Cubase, the Stereo In/Out tracks must be hidden since these do not send HUI info to Raven.

Also, use G or H to zoom the Cubase mixer to show exactly 24 tracks, this way Banking 24 will work correctly.

The Project/Mix buttons relate to Workspaces 1 and 2. So when hitting "Mix" it is recalling Workspace 2. These Project/Mix buttons also update the current Workspace before switching so any changes to the workspaces will be saved when pressing these buttons.

Here is an article on how to align the Cubase Internal Mixer.
slatemt.zendesk.com/hc/en-us/articles/220305987-Cubase-Mixer-Alignment

Oct 26, 2016 7:36:57 GMT -8 wedoh said:

also when i choose a channel it seems to automaticly make it rec armed but my guess is that that is a setting inside of cubase.

www.steinberg.net/forums/viewtopic.php?t=61762

Oct 26, 2016 7:36:57 GMT -8 wedoh said:

could this be bugs due to the cubase version still in beta?

The only reason it is in Beta is due to the OPTION RETURN key command not being available in Cubase 8.5.

Everything else should work great.

please file a support ticket if you want us to double check your setup and system settings.

There is a little bug where if you open a session without 24 tracks in it then Raven will not draw the faders.
Check out this fix. slatemt.zendesk.com/hc/en-us/articles/227911807-Cubase-Raven-not-showing-Faders-when-Opening-Project-

Jamey Z
Slate Media Technology
Jamey@stevenslateaudio.com

wedoh
New Member

Posts: 13

Raven auto setup issue Oct 27, 2016 1:28:02 GMT -8

Quote

Post by wedoh on Oct 27, 2016 1:28:02 GMT -8

Oct 26, 2016 8:57:28 GMT -8 jameyz said:

Oct 26, 2016 7:36:57 GMT -8 wedoh said:

Hi,
I use a mti 2 model with Cubase 8.5 and OS X 10.12.
I setup my computer and daw according to the video startup guide, aswell as the manual.
I had to setup Raven manually inside of Cubase due because the auto setup function did not start.

Did you add Raven and other apps into accessibility???

Oct 26, 2016 7:36:57 GMT -8 wedoh said:

The thing is, now the raven interface seems to be working but its not running smoothly all the time so it feels like its not properly configured.
sometimes the faders not responding and the external mixer not showing the channels available.

There is a little bug where if you open a session without 24 tracks in it the first time then Raven will not draw the faders. Try just closing and reopening the project if this happens.

Check out this other fix too. slatemt.zendesk.com/hc/en-us/articles/227911807-Cubase-Raven-not-showing-Faders-when-Opening-Project-

Oct 26, 2016 7:36:57 GMT -8 wedoh said:

The nav pad does notseem to work as it should either

The navpad uses key commands G and H to zoom, so if these aren't working perhaps you have something setup incorrectly in the UPDD Gestures.

slatemt.zendesk.com/hc/en-us/articles/216754667-Setting-up-extra-UPDD-Gestures

Oct 26, 2016 7:36:57 GMT -8 wedoh said:

and the yellow squares on the buttom of the faders dont seem to be correctly alligned. and the yellow squares on the buttom of the faders dont seem to be correctly alligned.

To align the Raven Internal Mixer with Cubase, the Stereo In/Out tracks must be hidden since these do not send HUI info to Raven.

Also, use G or H to zoom the Cubase mixer to show exactly 24 tracks, this way Banking 24 will work correctly.

The Project/Mix buttons relate to Workspaces 1 and 2. So when hitting "Mix" it is recalling Workspace 2. These Project/Mix buttons also update the current Workspace before switching so any changes to the workspaces will be saved when pressing these buttons.

Here is an article on how to align the Cubase Internal Mixer.
slatemt.zendesk.com/hc/en-us/articles/220305987-Cubase-Mixer-Alignment

Oct 26, 2016 7:36:57 GMT -8 wedoh said:

also when i choose a channel it seems to automaticly make it rec armed but my guess is that that is a setting inside of cubase.

www.steinberg.net/forums/viewtopic.php?t=61762

Oct 26, 2016 7:36:57 GMT -8 wedoh said:

could this be bugs due to the cubase version still in beta?

The only reason it is in Beta is due to the OPTION RETURN key command not being available in Cubase 8.5.

Everything else should work great.

please file a support ticket if you want us to double check your setup and system settings.

There is a little bug where if you open a session without 24 tracks in it then Raven will not draw the faders.
Check out this fix. slatemt.zendesk.com/hc/en-us/articles/227911807-Cubase-Raven-not-showing-Faders-when-Opening-Project-

Thank you for your support, i will try it out

wedoh New Member Posts: 13	Raven auto setup issue Oct 27, 2016 13:29:47 GMT -8 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by wedoh on Oct 27, 2016 13:29:47 GMT -8 I tried it all from the beginning. Now i think everything is working! Thanks!

Post by wedoh on Oct 26, 2016 7:36:57 GMT -8

Post by jameyz on Oct 26, 2016 8:57:28 GMT -8

Post by wedoh on Oct 27, 2016 1:28:02 GMT -8

Post by wedoh on Oct 27, 2016 13:29:47 GMT -8